M7 Multifunction DC Charger, Balancer (6S/10A/200W)

The ToolkitRC M7 is a DC Battery Charger Workstation that features a color screen, 200W of power and is extremely compact. This charger has many functions and is capable of measuring resistance, signal, signal output, ESC testing and so much more. This a great charger for any pit station, flying field or shop. 

Features:

• Battery Charger
• Cell Checker
• PWM, PPM, S.Bus Input/output & Receiver tester
• Lithium battery cut-off voltage can be set (TVC function)
• Measure battery voltage, internal resistance, balance
• Measure PWM, PPM, S.Bus signal values @ 1ms accuracy
• Output PWM, PPM, S.Bus standard signal @ 1ms accuracy
• Customizable 1-28V constant output voltage, 1-10A constant output current
• Multi-language optional
• USB 2.1A@5.0V Output (Mobile device charging)
• Udisk firmware upgrade (Slave device)

Specifications:

• Charger:
  • Input voltage: 7.0-28.0V @Up to 12A
  • Type of battery:
    • Lipo, LiHV, LiFe, Lion: 1-6 Cell
    • NiMh: 1-16 Cell
    • Pb: 1-10 Cell
  • Balance current: 400mA @2-6S
  • Charger power: 200W @Up to 10A
  • Discharge power: 
    • Recycle mode: 200W @Up to 10A
    • Normal mode: 10W @Up to 3A 
  • USB: 2.1A @5.0V or Upgrade
• Measurement:
  • PWM: 880-2200us @20-400Hz
  • PPM: 880-2200us - 8CH @20-50Hz
  • SBUS: 880-2200us - 16CH @20-100Hz
  • Voltage: 1.0-5.0V @1-6S
  • Internal Resistance: 1-99mR @1-6S
  • ESC: 200W @10A PWM Output
• Output: 
  • PWM: 500-2500us @20-1000Hz
  • PPM: 880-2200us - 8CH @20-50Hz
  • SBUS: 880-2200us - 16CH @20-100H
  • Power Supply: 1.0-28.0V  @1.0-10A  Mode: CC+CV
  • Over Current Cutoff Time: <5ms
• General:
• Size: 73x51x27mm (2.87x2.00x1.06in)
• Weight: 90g (3.17oz)
• LCD: IPS 2.0in LCD 320x240 Pixel