Features

• Battery Charger
• Cell Checker
• Servo Tester
• PWM,PPM.SBUS Input/output Receiver & Flight control tester
• Viable AMp/volt DC Power supply (Required external DC input)

* be prepared to update the charger as needed to always have the newest features

Specifications

General

• Charge, discharge and balance management support LiPo, LiHV, LiFe 1-8S，NiMh 1-20S，PB 1-12S battery.
• Charger current：MAX 15A @ 300W
• Discharge current：reccycle mode 15A @ 300W Normal: 3A @ 20W
• Balance current: 400mA @ 2-8S
• Lithium battery cut-off voltage can be set (TVC function)
• Measure battery voltage, internal resistance, balance
• ESC power meter, together with output voltage and throttle signal
• Measure PWM / PPM / xBUS signal values, Accuracy 1ms
• Output PWM / PPM / xBUS standard signal, Accuracy 1ms
• Customizable 5-30V constant voltage, 1-15A constant current
• Charge the drone battery, activate and charge.
• Multi-language optional
• USB 2.1A@5.0V Output，for Mobile devices
• Udisk firmware upgrade (Slave device)

Charger

• Input voltage: 7.0-30.0V  @MAX 16A
• Type of battery: LiPo/LiHV/LiFe @1-8S, NiMh @1-20S, Pb @1-10S
• Balance current: 400mA @2-8S
• Charge power: 300W @MAX 15A
• Discharge power: 300W  @MAX 15A Recycle mode, 12W @ 3A Normal
• USB: 2.1A @5.0V  or  Upgrade
• Dimensions: 98x68x35mm
• Weight: 142g
• LCD: 2.2" 132x64 Pixel，Black and White

Measurement

• PWM: 880-2200us @20-400Hz
• PPM: 880-2200us*8CH @20-50Hz
• SBUS:  880-2200us*16CH @20-100Hz
• Voltage: 1.0-5.0V @1-8S
• IR: 10-500mR @1-8S
• ESC:  300W @Max 15A

Output

• PWM: 880-2200us @20-400Hz
• PPM: 880-2200us*8CH @20-50Hz
• SBUS: 880-2200us*16CH @20-100Hz
• Power: 1.0-30.0V  @1.0-15A  Mode:CC+CV
• OverCurrent Cut Off time: 50ms